Value Your Trade in 30 Seconds

2017 Yamaha Adventurer Two (Gas EFI)

Call for Price


Availability
Brochure
Year
2017
Manufacturer
Yamaha
Model
Adventurer Two (Gas EFI)

Overview

Description

When the task at hand calls for more muscle, this big brother of the Hauler is exactly what you need. It’s outfitted with an 800-pound payload capacity, beefed-up transaxle, four wheel drum brakes, and a reputation for being able to take on pretty much anything. Whether you’re moving supplies out to the back nine, or just want to show off a bit, this crew member is the boss.

Power
  • Fuel System: Electronic Fuel Injection
  • Ignition System: Transistor
  • Engine Type: Single Cylinder 60° Inline OHV
  • Bore x Stroke: 85 x 63 mm
  • Compression Ratio: 8.0:1
  • Lubrication System: Splash
  • Oil Capacity: 1 Liter
  • Air Cleaner: Oil Spread Over Pleated Paper + Urethane Foam Pre Filter
  • Cooling System: Forced Cooling
  • Maximum Torque: 25.5/2500 (Nm/ rpm)
  • Starting System: Starter/ Generator
Dimensions
  • Overall Length: 2922 mm (115 in.)
  • Overall Width: 1243 mm (48.9 in.)
  • Overall Height(With Suntop): 1924 mm (75.75 in.)
  • Overall Height(Without Suntop): 1917 mm (75.5 in.)
  • Wheelbase: 1200 mm (47.2 in.)
  • Front Wheel Tread: 990 mm (39 in.)
  • Rear Wheel Tread: 980 mm (38.6 in.)
  • Minimum Ground Clearance: 115 mm (4.5 in.)
  • Floor Board Height: 1200 mm (47.2 in.)
Chassis
  • Frame: HybriCore™ Chassis features a robotic welded automotive ladder-style steel frame mated to a polypropylene structural floor. Frame is protected with a multi-step full-immersion phosphate treatment, electro-deposition epoxy-based coating, and an electrostatic applied polyester/urethane powder topcoat
  • Body: Custom-formulated thermoplastic olefin and the front is painted with a two-part top coat of high-luster automotive-grade polyurethane.
  • Steering: Self-compensating double reduction helical rack-and-pinion, permanently lubricated with sealed bearings and greaseless tie-rod ends
  • Front Wheel Suspension: Tru-Trak II™ fully independent automotive-style strut suspension
  • Rear Wheel Suspension: Unit swing arm with coil springs over hydraulic shock absorbers
  • Brakes: Self adjusting mechanical rear drum
  • Seating: Seamless, fabric-backed vinyl bonded to pure, virgin foam contoured seat cushions and mated to a wrap and moisture-resistant polypropylene bottom, strengthened with plated steel inserts
  • Bumpers: Front and rear 5 mph energy-absorbing bumpers
Performance
  • Maximum Forward Speed: 25
  • Minimum Turning Radius: 3.3
  • Brake Stopping Distance: ASME B56.8
  • Energy Consumption On Flat Paved Road: N/A
  • Maximum Forward Speed: 24
  • Hill Climbing Capacity: 20
  • Minimum Turning Radius: 2.8
  • Fuel Consumption On Flat Paved Road: 13.5,31.8
General
  • Dry Weight: 392 kg (864.2 lb.)
  • Cargo Box Material: Roto-molded linear polyethylene
  • Cargo Bed Capacity: 363 kg (800 lb.)
  • Towing Capacity: Rolling Weight: 1000 lb. Towing Weight: 150 lb.
  • Cargo Bed Load Height: 690 mm (27.1 in.)
  • Fuel Tank Capacity (Gas): 22 L (5.8 U.S. gal.)
  • Tire Size: Front: 18 x 8.5 - 8 (4-ply rating) Rear: 18 x 8.5 - 8 (6-ply rating)
  • Seating Capacity: 2 persons
  • Available Model Colors: Standard: Tortuga Optional: Glacier, Garnet, Tanzanite, Moonstone Metallic, Onyx Metallic, Sandstone Metallic
  • Available Seat Color: Stone
  • Available Suntop Color: Black
Warranty
  • Warranty: Standard 2-year limited vehicle warranty

Specs

Engine

Engine Type
Single Cylinder 60 deg. Inline OHV
Bore and Stroke
85 x 63 mm
Compression Ratio
8.0:1
Cooling
Forced Cooling
Fuel System
Electronic Fuel Injection
Ignition
Transistor

Chassis

Frame Type
HybriCore™ Chassis features a robotic welded automotive ladder-style steel frame mated to a polypropylene structural floor. Frame is protected with a multi-step full-immersion phosphate treatment, electro-deposition epoxy-based coating, and an electrostatic applied polyester/urethane powder topcoat
Front Suspension
Tru-Trak II™ fully independent automotive-style strut suspension
Front Tire
18 x 8.5 - 8 (4-ply rating)
Rear Suspension
Unit swing arm with coil springs over hydraulic shock absorbers
Rear Brakes
Self adjusting mechanical rear drum
Rear Tire
18 x 8.5 - 8 (6-ply rating)

Dimensions

Dry Weight
864.2 lb. (392 kg)
Fuel Capacity
5.8 U.S. gal. (22.0 L)
Wheelbase
47.2 in. (1200 mm)
Ground Clearance
4.5 in. (115 mm)
Passenger Capacity
2
Box Capacity
800 lb. (363 kg)
Towing Capacity
Rolling Weight: 1000 lb.; Towing Weight: 150 lb.

Transmission

Max Forward Speed
25 mph

General

Colors
Tortuga; Optional: Glacier, Garnet, Tanzanite, Moonstone Metallic, Onyx Metallic, Sandstone Metallic
Warranty
Standard 2-year limited vehicle warranty

Related Products