Value Your Trade in 30 Seconds

Honda Power Equipment WSP100


Honda Power Equipment



Key Features
  • 1hp 115V submersible trash pump
  • Side discharge
  • 150 gal./min capacity
  • Solids handling capability up to 2"
  • Automatic non-mercury float switch
  • Rated for continuous use
  • 1 hp, 115V submersible trash pump: 115 Volt operation allows the pump to be plugged into a standard outlet. (GFCI is recommended).
  • Solids handling up to 2.0": Move slurry and dirty liquids without the worry of damaging the pump.
  • Ideal for draining basements, window wells, garden irrigation, decorative fountains and more
  • 150 gal./min capacity
  • Rated for continuous use: Operates on continuous duty in temperatures of up to 104°, and intermittent duty up to 140°. Since this pump can be used 7 days a week, 24 hours a day, it is suitable for any application that needs to move water from one place to another on a continuous basis.
  • Lightweight, durable stainless steel casing: The pump won’t rust or corrode, minimizing costly repairs and replacement. The 304 stainless steel is an industrial grade, again minimizing damage and reducing the need for repairs.
  • Automatic non-mercury float switch: Honda submersible pumps use a mechanical float switch instead of mercury, eliminating the use of hazardous materials in the pump.
  • Built in thermal reset switch: If the pump overheats, it automatically resets itself after the pump cools down. This is designed to protect the motor from periodic overheating.
  • 25 foot heavy duty cord
  • Side discharge: Side discharge submersible pumps offer higher discharge and solids handling capabilities of up to 2 inches.
  • Operates fully or partially submerged: No need to worry about the water level for the pump!
  • Shielded ball bearings for added durability: Shielded ball bearings, both top and bottom, add significantly to the longevity of the pump.
  • Efficient air-insulated motor
  • Oil lubricated double mechanical seals: Oil lubricated double mechanical seals prevent damage to the seal if the pump is run dry.
  • Pump Type: Submersible Trash pump
  • Starting Type: Automatic
  • Casing: Stainless Steel
  • Motor (HP): 1
  • Voltage: 115
  • Starting amps: 47
  • Running amps: 11.1
  • Duty: Continuous
  • Motor insulation: Class F
  • Overhead protection: Built-In Thermal Automatic Reset
  • Discharge Type: Side
  • Discharge capacity: 150 gpm
  • Max. head (feet): 42
  • Port diameter ( inches): 2.0 FNPT
  • Maximum pressure: 18 psi
  • Solids handling: 2.0 in.
  • Impeller: Single Channel Stainless Steel
  • Seals: Tandem Mechanical Carbon/Ceramic-upper SIC/SIC-lower
  • Cord length (feet): 25
  • Cord type: Heavy-Duty 115V
  • Dimensions (WxH): 9.0 in. x 22.8 in.
  • Pump diameter: 9.0 in.
  • Dry weight: 41 lb.
  • Residential Warranty: 1 year
  • Commercial Warranty: 1 year



Engine Type
115V electric
Engine Manufacturer
1 hp


Pump Style
Submersible Trash pump
Single Channel Stainless Steel
Discharge Capacity
150 gpm
Discharge Port Diameter
2.0 in. FNPT
Head Lift
42 ft.
Max Pressure
18 psi
9.0 in. x 22.8 in.
41 lb.

Related Products